OptoCPOThe systems notebook
Home/Articles/Foundations

CPO, Optical I/O, and Silicon Photonics Are Not the Same Thing

A systems guide to three related terms that describe different layers of an optical interconnect.

Foundations / OptoCPO Note 01Published 2026-09-23Independent Education

Start with the layer each term describes

Co-packaged optics, optical I/O, and silicon photonics often appear in the same discussion, but they are not interchangeable. Co-packaged optics is a packaging architecture. Optical I/O is a data-movement function. Silicon photonics is a technology platform. Keeping those layers separate makes architecture reviews clearer and prevents a device technology from being mistaken for a complete product strategy.

Co-packaged optics describes placement

In a conventional pluggable system, high-speed electrical signals travel from a switch or compute ASIC across a board to optical modules at the faceplate. CPO moves optical engines close to the ASIC, usually into the same package or onto a closely integrated substrate. The shorter electrical path can reduce channel loss, equalization demand, and electrical I/O power while increasing bandwidth density.

That placement creates new responsibilities. Photonics, electronics, fiber attach, cooling, test, and repair now share a tightly coupled package. A CPO decision therefore changes manufacturing flow, laser strategy, serviceability, and system economics as well as signal integrity.

Optical I/O describes a function

Optical I/O means information crosses a defined boundary using light. The boundary might be a chiplet, package, board, rack, or larger system. The optical engine may be co-packaged, mounted on a board, or implemented in a removable module. When evaluating an optical I/O claim, identify the boundary, usable bandwidth, energy per bit, reach, fiber count, latency, and what power is included.

Silicon photonics describes an implementation platform

Silicon photonics uses semiconductor-compatible processes to integrate optical functions such as waveguides, modulators, detectors, couplers, filters, and routing structures. It can provide density and manufacturing scale, but it does not define the complete link. Lasers may be external or integrated through another material system, and drivers, TIAs, control electronics, packaging, and fibers remain essential.

How the concepts overlap

A co-packaged optical engine can use silicon photonics to provide optical I/O. That is one intersection, not a definition. Silicon photonics can also appear in pluggable transceivers, sensors, and other systems. Optical I/O can use other photonic material platforms. CPO can use different combinations of lasers, modulators, detectors, and packaging approaches.

Architecture review question

Are we discussing where optics are placed, what boundary data crosses optically, or how optical functions are fabricated?

A practical evaluation sequence

  1. Define the system boundary and required reach.
  2. State the aggregate and per-lane bandwidth.
  3. Map the electrical and optical paths.
  4. Identify the photonic platform and laser strategy.
  5. Include thermal, fiber-attach, test, yield, and repair assumptions.
  6. Compare energy and cost using the same system boundary.

The terminology becomes useful when each term is tied to a specific engineering decision. That discipline turns a trend discussion into a system architecture discussion.

Apply the terminology to real decisions

Compare CPO vs pluggable optics, or study how optical I/O coupling fails at the package level.